Specifiche del materiale della copertura delle coperture di magazzino
Le coperture sono un modo economico per aggiungere riparo alle aree esterne o strato sopra i tetti esistenti per una protezione aggiuntiva contro gli elementi.
PPGI - FERRO ZINCATO PRE VERNICIATO
Conferma materiale a : IS 277, IS 513 & IS 14246
Rivestimento su: Ferro zincato a tuffo caldo
Spessore : Spessore standard di 0,50 mm TCT
Rivestimento Zn (GSM): Zn 120
Sistemi di verniciatura: vernice polistere modificata regolare (RMP) opzionale (SMP & PVdF)
Mpa : 245 Mpa
Primer Service Coat : 5μ micron Epoxy/
Top Coat (Superficie espositiva) : da 18μ a 20μ
Strato inferiore: da 5μ a 7μ
BARE GALVALUME-FINITURA DEL MULINO GALVALUME
Conferma materiale a : AS 1397
Rivestimento su : Acciaio laminato a freddo
Spessore : Spessore standard di 0,47 mm TCT
Rivestimento AL-An (GSM): AZ 150
MPa : 245 / 350 / 550 Mpa
PPGL -- LAMIERE D'ACCIAIO GALVALUME PRE VERNICIATE
Conferma materiale a : AS 1397
Rivestimento su : Galvalume
Spessore : Spessore standard di 0,50 mm TCT
Rivestimento AL-An (GSM): AZ 150
Paint System : Regular Modified Polyster Paint (RMP) Optional (SMP & PVdF)
Mpa : 245 / 350 / 550 Mpa
Primer Service Coat : 5μ micron Epoxy/
Top Coat (Superficie espositiva) : da 18μ a 20μ
Strato inferiore: da 5μ a 7μ









